Bryant Evolution Connex Control User Manual

46
6.3.3.9. Furnace G--Terminal Alert
Use the alert function to select the contact state for an alert. Select Normally Open
or Normally Closed, and then save your selection.
A13230
Shutdown: This setup option selects the change of state required for shutdown.
Select Normally Open or Normally Closed, and then save your selection.
6.3.3.10 Furnace G Terminal Alert Label
Once the G Terminal Alert label has been entered, it is shown both on the main
screen and in the notification email when the alert becomes active.
A170248

Bryant Evolution Connex Control Specifications

General

Brand	Bryant
Model	Evolution Connex Control
Category	Thermostat
Language	English