81
6.6.4. EXV Position
This screen allows the installer to set the EXV position and monitor the suction
pressure.
A14233
6.7. Dealer Logo
NOTE: More detailed information can be found on HVACPartners.com under the
Product tab> Thermostats & Controls> SYSTXBBECC01> Documents & Downloads>
Marketing/Miscellaneous> Evolution Connex Control Dealer Logo Application --
Instructions.
Touch DEALER LOGO to upload the dealer logo and contact information from a
standard SD card connected to the Evolution Connex Control. The “Dealer Logo
Application” PC/MAC Desktop application download available at
www.MyEvolutionConnex.Bryant.com/Evolution/downloads
is required to properly
format the dealer logo and contact information for use on the wall control.
To Next Page
Loading...
