Bryant Evolution Connex Control User Manual

34
6.3.1.4. Reset factory defaults
This option allows the installer to reset certain factory parameters. After the
selections are made, touch SAVE.
S Program Schedule: Reset back to pre--programmed time and temperature.
S User Settings: Reset user settings back to pre--programmed values.
S Install Settings: Reset installation settings back to pre--programmed values.
S Last 10 Events: Reset the last 10 system events under the Service menu.
6.3.1.5. Scheduling On/Off
This option lets the installer allow comfort schedule programming features. After
the selection is made, touch SAVE.
S Scheduling: On or Off
d Default = On

Bryant Evolution Connex Control Specifications

General

Brand	Bryant
Model	Evolution Connex Control
Category	Thermostat
Language	English