88
S If you have any issues, please contact your servicing dealer or contact the
support desk at 1--800--428--4326.
S When the connection to the MyEvolution web server has been established, the
status screen will show Connected for both Wi--Fi and the server.
A13242B
7.2 Setup and Status Information (Dealer--provided Router)
To establish the Wi--Fi
®
network connectivity to the Evolution Connex Control
through the Evolution System Wireless Access Point (TP--LINKR Device), connect
the WAN (BLUE port) connection of TP--LINK Wireless Access Point to the
home’s existing router LAN port using the provided Ethernet cable. The LAN ports
on the back of the TP--LINK Wireless Access Point should not be used for other
devices. The Evolution (TP--LINK) Wireless Access Point should only be used for
connection of the Evolution Connex Control(s) and is not intended to be used wired
or wirelessly with any other devices.
To Next Page
Loading...
