87
S The control will inform you if the connection is successful. If so, touch DONE.
d If the connection is unsuccessful, verify that the proper information has
been entered before you touch RETRY. The control will go through the
process again.
A13238
S After the control has connected to the network, go to
www.MyEvolutionConnex.Bryant.com
to register the unit and begin remote
access. This requires the MAC address and serial number of the Evolution
Connex Control. To find the serial number and MAC address of the Evolution
Connex Control, click on Menu, Down Arrow, Wireless and View MyEvolution
Registration Info. This screen will provide the information needed on the
MyEvolution website during registration.
A170285B
To Next Page
Loading...
