87
A12118
S After your control has connected to the network, go to
www.MyEvolutionConnex.Bryant.com
to register the unit and begin remote
access. This requires the MAC address and serial number of the Evolution
Connex Control, NOT the Wireless Access Point. To find the serial number and
MAC address of the Evolution Connex Control, click on Menu, Down Arrow,
Wireless and View My Evolution Info. This screen will provide the information
needed on the MyEvolution website during registration.
S If you have any issues, please contact your servicing dealer.
S When the connection to the MyEvolution web server has been established, the
status screen will show Connected for both the Wi--Fi network and the server.
(TP--LINKr is a trademark of TP--LINK Technologies Co., Ltd.)
To Next Page
Loading...
