BT 1000 User Guide

Your BT Digital Video Baby Monitor 1000
If you experience any problems, please call the Helpline on Freephone 0808 100 6554* or visit www.bt.com/producthelp
10
Parent unit
Link light
On = strong signal is
detected between the
Parent and Baby unit.
Flashing = Parent unit
cannot link to the
Baby unit.
Off = Parent unit
is turned off.
Battery light
On = Parent unit
battery is
being charged.
Flashing = Parent unit
battery is low and
needs charging.
Off = Parent unit
battery is fully
charged (if connected
to mains power) or
Parent unit battery
is adequate (when
operated using
the battery).
Power on/off
Press and hold to turn
on or off.
Zoom
Whilst viewing in
single-CAM mode,
press to zoom in or out.
View
Press repeatedly to
view an individual
camera or all cameras at
the same time.
Press and hold to turn
the screen off or press
to turn it on.
Power socket
(beneath the
rubber cover).
Speaker
To listen to sounds
transmitted from the
Baby unit.
Talk
Whilst viewing in
single-CAM mode,
press and hold to talk
to the Baby unit.
light
On = Parent unit screen
is in multi-CAM mode or
the Parent unit speaker
volume is turned off.
Talk light
On = Parent unit
is talking to the
Baby unit.
Antenna Microphone

BT 1000 Specifications

General

Type	Cordless Telephone
GAP Compatible	Yes
Phonebook entries	50
Caller ID	Yes
Call Waiting	Yes
Redial	Yes
Talk time	10 hours
Number of Handsets	1
Answering Machine	No
Standby time	Up to 100 hours
Indoor range	50m