If you experience any problems, please call the Helpline on Freephone 0808 100 6554* or visit www.bt.com/producthelp
37Parent unit settings menu
Vibrate
You can set whether you want the Parent unit
to vibrate. The vibrate setting is pre-set to On if
speaker is off.
1. Press
.
2. Press
or to highlight VIBRATION, then
press
or .
3. Press
or to choose On if speaker is off,
Always on or Off, then press
to confirm. You
will hear a confirmation tone.
The following events will cause
the Parent unit to vibrate (when
set to do so):
• Low battery alert
(Parent or Baby unit).
• Loss of link alert.
• Temperature alert.
• Sensitivity level exceeded.
To Next Page
Loading...
