If you experience any problems, please call the Helpline on Freephone 0808 100 6554* or visit www.bt.com/producthelp
Using your BT Digital Video Baby Monitor 1000 29
The Talk feature will not work
in multi-CAM view mode. You
will need to select a Baby unit
in single-CAM view mode to
use Talk.
If the loudspeaker volume on
the Parent unit is set to off,
it will be reset to the default
volume setting after you press
and hold the
button.
Lullaby playback will be paused
if the Talk feature is being used,
when finished lullaby playback
will resume.
Talk to the Baby unit
You can use the Parent unit Talk feature as a one-
way intercom to comfort and reassure your baby.
By speaking into the Parent unit your baby will hear
your voice from the Baby unit. Please note that
when using the Talk feature you will not be able to
hear your baby until you release the
button.
1. If you have more than one Baby unit you may need
to press the
button first to select the Baby
unit you want to talk to.
2. Press and hold the
button to speak to your baby,
you should speak towards the MIC (microphone) on
the Parent unit. Your voice will be heard from the
Baby unit and while the
button is depressed the
Talk light will be on.
When using the Talk feature, hold the Parent unit
approximately 30cm in front of your mouth when
talking to baby.
To Next Page
Loading...
Need help?
General
