If you experience any problems, please call the Helpline on Freephone 0808 100 6554* or visit www.bt.com/producthelp
31Parent unit settings menu
3. Press or again to select Low Battery Tone.
4. Use
or to select On or Off, then press
to confirm. You will hear a confirmation tone.
Turn the No link alert on the Parent unit on/off
The Parent unit will beep whenever the link between
the Parent and Baby unit is lost. You can turn this
alert beep on or off.
1. Press
.
2. Press
or to highlight ALERT TONE, then
press
or .
3. Use
or to highlight No Link Alert, then
press
or .
4. Use
or to select On or Off, then press
to confirm. You will hear a confirmation tone.
The default setting is on.
The No link alert will only work
when viewing that particular
Baby unit in single-CAM or
multi-CAM mode.
To Next Page
Loading...
