If you experience any problems, please call the Helpline on Freephone 0808 100 6554* or visit www.bt.com/producthelp
32 Parent unit settings menu
Sensitivity level
You can change the sensitivity level of sounds
being received from the Baby unit from Level 1 to
Level 5 (maximum). The default setting is Level
3. The higher the sound sensitivity level is set, the
more sensitive the Baby unit is in detecting sounds
transmitted from the Baby unit to the Parent unit.
If you want the Baby unit to be very sensitive
in detecting sounds, you may wish to set the
sensitivity to Level 5 (maximum) so that the Baby
unit will detect any sounds including background
noises. If you want it to be less sensitive in detecting
sounds, you may wish to set the sensitivity to a
lower level (Level 1 – 4), so that the Baby unit will
transmit sounds to the Parent unit only when your
baby is making a noise.
To set the sound sensitivity level of the Baby unit
1. Press .
2. Press
or to highlight SENSITIVITY, then
press
or .
The Baby unit(s) must be turned
on in order to enter the sensitivity
menu of the Parent unit.
To briefly override the
sensitivity setting, to hear all
sounds in baby’s room (for 15
seconds), briefly press the
button on the Parent unit.
To Next Page
Loading...
