Setting up
If you experience any problems, please call the Helpline on Freephone 0808 100 6554* or visit www.bt.com/producthelp
22
Important
Before you wall mount,
please check that:
• the wall can support the
weight of the product
• the power adaptor will reach
the power socket
• you are not drilling into any
hidden wiring or plumbing
BT are not responsible for any
damage/injury caused while
attempting to wall mount
your product.
Wall mounting the Baby unit – optional
The Baby unit is ready for tabletop use but you can
wall mount it using the wall mounting bracket
supplied if you wish to. Make sure you test the
units (see page 21) from the proposed position
before wall mounting.
1. Place the wall mounting bracket against the wall
where you want to wall mount the Baby unit and
use a pencil to mark the top two holes as shown.
!
!
2. Remove the wall mounting bracket and check the
reception strength of the Baby unit and camera
angle before drilling two holes in the wall using a
5mm drill bit.