Using your BT Digital Video Baby Monitor 1000
If you experience any problems, please call the Helpline on Freephone 0808 100 6554* or visit www.bt.com/producthelp
28
Multi-CAM mode is not
available if only one Baby unit is
paired to the Parent unit.
View
You can change the screen to view images from
different Baby units (if you have more than one
Baby unit), or you can turn the screen off.
To view different Baby units
1. Press the button to select the Baby unit you
want: CAM 1, CAM 2, CAM 3, CAM 4 or multi-CAM.
Zoom in or out in multi-CAM mode (if you have
more than one Baby unit)
1. Use the , ,
or
button to choose
the Baby unit you want, then press the
or
button.
2. Press the
button again to zoom in. Use the
, ,
or
button to move the zoomed
image up, down, left or right.
3. To zoom out again, press the
button.
To turn the screen on/off
1. Press and hold the button until the screen
turns off.
2. To turn the screen back on, press any button.