BT 1000 User Guide

If you experience any problems, please call the Helpline on Freephone 0808 100 6554* or visit www.bt.com/producthelp
Setting up 19
Removing the batteries
If you ever need to remove the batteries, unplug
the power adaptor and then open the battery
compartment cover and use the ribbon to gently
pull them out.
2. Plug the power adaptor cable (item code 064785)
into the socked marked
on the side of the Baby
unit and plug the other end into the mains power
and switch on.
If the Baby unit is not going to
be used for a long time, remove
the batteries to prevent any
possible leakage.
Rechargeable batteries
can be used but the Baby
unit cannot charge the
rechargeable batteries.
Battery low warning
When the batteries are low the
light on the
button of the
Baby unit will flash red. You will
need to replace the batteries.
WARNING
Only use the power adaptor
supplied. Using an incorrect
power adaptor could
permanently damage
your product.
Make sure the Baby unit
and power adaptor cable are
kept away from the reach
of children.

BT 1000 Specifications

General

Type	Cordless Telephone
GAP Compatible	Yes
Phonebook entries	50
Caller ID	Yes
Call Waiting	Yes
Redial	Yes
Talk time	10 hours
Number of Handsets	1
Answering Machine	No
Standby time	Up to 100 hours
Indoor range	50m