BT NetAgent Series - Installing NetAgent Mini with UPS

BT UPS Enterprise SNMP Agent
Issued by: BT
Version no: 6.1
Date: March 2019
Page 20 of 103
3.2 Install the NetAgent Mini with UPS and Network
3.2.1 For External NetAgent Mini
• Connect the NetAgent Mini to LAN, using the UTP port.
• Connect the cable from NetAgent Mini to the serial port of UPS.
• Plug the DC adapter to UPS outlet, the DC plug connected with NetAgent
Mini.
3.2.2
For Internal NetAgent Mini
• Please make sure the connector direction of the cable is correct before
connecting to the NetAgent.
• Connect the NetAgent module to LAN, using the UTP port.
Warning: Please make sure the input Voltage and Frequency of the DC power adapter
(NetAgent II – DC 9V / NetAgent Mini – DC 6V or 5.3V) is correct before plug the power
into!
To LAN
To
DC Adapter
To UPS
To LAN
To UPS
NetAgent Mini -Internal
NetAgent Mini - External