BT UPS Enterprise SNMP Agent
Issued by: BT
Version no: 6.1
Date: March 2019
UPS Loading
To configure all the other devices and its load that connects with NetAgent UPS. Double
click on the device listed and configure
8.5.3.2 UPS Monitor
Highlight NetAgent UPS device and configure. Or right click on the highlighted device and
click on monitor device.
Meter
Display NetAgent UPS information such as input voltage, output voltage, temperature,
capacity..etc in diagram.
Digital
Display NetAgent UPS information such as input voltage, output voltage, temperature,
capacity..etc in digital.
To Next Page
Loading...