BT UPS Enterprise SNMP Agent
Issued by: BT
Version no: 6.1
Date: March 2019
5 UPS Web management by NetAgent
5.1 Introduction
After finishing NetAgent installation, including hardware installation and IP setting, you are
now able to go to NetAgent web site to monitor and control UPS by inputting NetAgent IP
address in Browser.
• Starting the Web Brower (Netscape or Internet Explore)
• Enter the NetAgent IP Address (Which is setting on Netility, e.g.
192.168.0.156).
Fig.13 Input NetAgent UPS IP address
• On the first screen, enter the current password. If no password has been set, just
press [ENTER].
Fig.14 NetAgent UPS Login dialog
To Next Page
Loading...
Need help?
General