BT UPS Enterprise SNMP Agent
Issued by: BT
Version no: 6.1
Date: March 2019
When there is a power abnormal condition happens, the NetAgent could also send the trap
information to the system manager to take proper action.
1.2.2 NetAgent Provides Shutdown Utilities
When a computer on the network with the NetAgent utility installed, it could locate all the
NetAgent on the network. When the UPS of this NetAgent is in AC failure condition or
Battery Low condition, the operating system could close all the files on the system, and
perform a gracefully shutdown. This could avoid system corrupt when a power
disconnection happened.
1.2.3 NetAgent II for Surrounding Monitoring
3Port NetAgent II could be use to connect the surrounding monitoring utility, NetFeeler II,
to get the temperature/humidity/smoke/fire signals. These informations could also be
revealed on the NetAgent Web page. When there is an abnormal condition happened, it
could also be sent as a trap to the system manager.
1.2.4 When we need the NetAgent?
• When we need to remote monitoring and controls the UPS conditions. For
example, the system manager could use the Internet to control all the UPS
conditions all over the country. When the shutdown utility is installed, the
shutdown utility could close all the files and shutdown the system when a power
abnormal condition happened.
• When we need to monitor surrounding conditions of the machine room,
warehouse, office, …etc. For example, the system manager could know the
temperature, humidity, smoke and water condition by using the NetAgent II-
3Ports version and NetFeeler II. The system manager could always know these
surrounding conditions by using a Web browser.
Fig.1 NetAgent connection Software
To Next Page
Loading...
Need help?
General