BT NetAgent Series - Telnet Remote Configuration; Telnet Connection Setup and Configuration

BT UPS Enterprise SNMP Agent
Issued by: BT
Version no: 6.1
Date: March 2019
Page 65 of 103
6 Telnet (Remote Configuration)
6.1 Introduction
NetAgent supports multiple Network Management systems and LAN protocols. After
finishing hardware installation, you are now able to choose any utilities that provided by
NetAgent to monitor and control UPS.
Here are introduction for using Telnet.
6.2 Telnet Configuration
• Select “Start” from Windows, click “Run” to key-in NetAgent IP Address
Fig.58 Telnet startup
• Successful link-up display:
Fig.59 Telnet Connection
• Initial to setup, please press “Enter” to enter telnet main screen. If the User
Name and Password had been set before, please enter actual value to access.
Fig.60 Telnet: Input User Name / Password