Troubleshooting and Maintenance
- 4.4 - SMART KNIT
Ordinary Maintenance
The SMART KNIT system does not require special maintenance interventions.
Although it is important to periodically clean the sensors and the terminal
according to the environment conditions in which the system operates.
The IS3 sensors are equipped with an automatic compensation function, which
allows the detection features to remain unaffected even when some traces of dirt
are present.
However, it is suggested to clean the sensors periodically.
For cleaning purposes, do not use solvent, but rather a soft cloth
dampened with neutral detergent or alcohol.
Repairs
Any repair intervention on the
SMART KNIT
terminal or the SM-
DIN modules must be carried out by skilled personnel from BTSR.
Any intervention attempt by non authorised personnel, voids the
warranty terms.
To Next Page