btsr SMART KNIT - General Features of SMART BTSR Systems

Overview
- 1.2 - SMART KNIT
General Features of SMART BTSR systems
! IS3 Sensors (Image Smart Scanning Sensor) (BTSR Patents)
The sensors are connected to the SM-DIN modules in “daisy-chain” mode, thus
making extremely easy the wiring operation.
! Automatically assigned numbers (BTSR Patents)
The identification of sensors is performed by the system by means of an
automatic numbering procedure resulting in a simple and fast system
configuration.
! Programmable Functions
The systems allows programming, either in global or selective way, the sensor
detection features (Sensor Image Variation Frequency, Sensitivity, Reaction
Time, Tolerance, etc.).
! Easy Monitoring and Fault Detection
Besides the information provided on the graphical display of the SMART
KNIT terminal, each IS3 sensor has a red LED that, when flashing, indicates
the location of the technical fault of the yarn, making the operator work easier.
! Sensor Diagnostic
Each IS3 sensor signals the operational status by means of two LEDs.
(For further information please refer to “Interpretation of the sensor signaling
lights").