btsr SMART MATRIX TWIST - SMART MATRIX Error Messages

SMART MATRIX Error Message
SMART MATRIX TWIST - 2-39 -
SMART MATRIX Error Messages
During the normal operation, the SMART MATRIX display will show RUNXXX
/YYY
(where XXX is the number
of active sensors and
YYY is the number of connected sensors).
In case of errors or fault detection, the RUNXXX
/YYY
indication will be replaced by a message which
summarizes the type of error or failure occurred.
The error and failure messages can be classified as follows:
Errors detected by the SMART MATRIX power-on self-diagnostic
Error on terminal EEPROM data
Error on terminal RAM data
Error on internal communication bus
Errors detected on SM-DIN Boards
Communication error between SMART MATRIX and SM-DIN Board number #.
RAM data loss on SM-DIN Board number #.
EEPROM data loss on SM-DIN Board number #.
Error detected on an I/O port of SM-DIN Board number #.
Communication error with the IS3.. sensor at the indicated position.