Style Programming
SMART MATRIX WINDINGFEEDER - 29 -
Style Modify
The Style Modifying function is basically identical to the Programming a New Style function.
The main differences are the following:
1) once you have activated the STYLE EDIT window from Main menu, choose from the database the style
you want to modify (e.g. APPLICATION01) and press MODIFY
Execute all the steps described on Programming a New Style
sequence, to bring all the desired changes with respect to the
reference style: APPLICATION01.
2) the bottom line of STYLE NAME screen that contains the style name setting keyboard, will show the
reference name (APPLICATION01) instead of the default name (WINDINGFEEDER).
Enter the name to be assigned to the modified
style.
To save the new style
If you change the style currently loaded on particular Windingfeeder devices (indicated by the diskette
symbol) the changes will be automatically loaded on the relevant Windingfeeder devices.
Style Clearing
This function allows you to remove a style from the database.
Once you have activated the STYLE EDIT
function from main menu, choose the style you
want to remove (e.g.: APPLICATION01)
Press CLR
Confirm the operation.
The APPLICATION01 style will be removed from
the database.
To Next Page
Loading...
