BTX Gemini X2 - Page 26

Gemini Series Electroporator User’s Manual
toll free 800.272.2775 • 508.893.8999 • www.btxonline.com
26
With load measurement OK, press the Go icon to run protocol.
Once protocol is complete, data regarding your pulse is displayed
and stored in the systems logs (BTX Gemini X2 only) for future use.
You may continue pulsing, go back to the set-up screen, or to the
home screen.
Performing Experiments
Creating New Protocols (continued)
Creating a Square Wave Protocol (continued)
View your protocol.
To run, tap the Omega icon.