Buchi Rotavapor R-220 Pro Continuous - 6 General Safety Rules

2 Safety
13 R-220 Pro Continuous Operation Manual, Version A
Air / gas
• Automatic pressure relief when system pressure exceeds system specications
• Automatic aeration in case of power interruption
Glass
• High temperature resistance and high transparency borosilicate glass
• Plastic+Glas coating as eective splinter protection in the event of an implosion (except evaporating
ask)
2.6 General safety rules
Responsibility of the operator
The head of the laboratory is responsible for training his/her personnel.
The operator shall inform the manufacturer without delay of any safety-related incidents which might
occur during operation of the instrument. Legal regulations, such as local, state and federal laws
applying to the instrument must be strictly followed.
Duty of maintenance and care
The operator is responsible for the proper condition of the instrument at use and that maintenance,
service and repair jobs are performed with care and on schedule by authorized personnel only.
Spare parts to be used
Use only genuine consumables and spare parts for maintenance and repair to assure good system
performance and to maintain the safety level. Any modications to the spare parts used are only
allowed with the prior written permission of the manufacturer.
Modications
Modications to the instrument are only permitted after prior consultation with and with the written
approval of the manufacturer. Modications and upgrades shall only be carried out by an authorized
BUCHI technical engineer. The manufacturer will decline any claim resulting from unauthorized modi-
cations.