3 Technical data
15 R-220 Pro Continuous Operation Manual, Version A
3.2 Technical data
Electrical
Maximum dimensions (WxDxH)
R-220 Pro Continuous 1200 x 710 x 1750 mm
Maximum weight (dry)
R-220 Pro Continuous 100 kg
Voltage 200 V (1Ph, N, G)
220 - 240 V (1Ph, N, G)
400 V (3Ph, N, G)
Frequency 50 – 60 Hz
Power consumption 5000 W (standard heater)
5500 W (4200 W heater)
Standards
UL / CSA Yes
CE marking Yes
Safety
Safety coated glassware Yes, except the evaporating flask
Over temperature protection of the bath ∙ Separate monitoring circuit with manual reset
∙ Error if temperature is 15 °C above set value
Rotation ∙ Soft start
∙ Stop in case of blocked rotation
At any Error ∙ Bath lowering, heater off, rotation off
∙ Type of error showed on display
∙ Reset with main switch
Rotation
Motor 1-phase; 0.6 A at 50 Hz; 10 Nm
Controlling Electronically
Speed 5 – 150 rpm
Accuracy +/- 1 rpm at 5 rpm to +/- 5 rpm at 150 rpm
Cooling
Consumption 120 – 200 L/h (adjustable via integrated needle
valve)
Restriction max. 2.7 bar abs. without pulsation
To Next Page
Loading...
