9 Shutdown, storage, transport and disposal
76 R-220 Pro Continuous Operation Manual, Version A
9 Shutdown, storage, transport and disposal
This chapter instructs how to shut down and disposal of the instrument. Information about storage
and shipping conditions can also be found here.
9.1 Storage and transport
Switch o the instrument and remove the power cord. To disassemble the Rotavapor
®
follow the
installation instructions in section 5 in reverse order. Remove all liquids and other residues before
packging the instrument.
NOTE
It is recommended to ship the instrument and its accessories in original packing to reduce the risk of
possible transport damages.
!
WARNING
Death or serious poisoning by contact or incorporation of harmful substances.
• Wear safety goggles
• Wear safety gloves
• Wear a suitable protective mask
• Wear a laboratory coat
• Clean the instrument and all accessories thoroughly to remove possibly dangerous substances
• Do not clean dusty parts with compressed air
• Store the instrument and its accessories at a dry place in its original packaging
!
CAUTION
Risk of minor or moderate injury by heavy weight of the instrument.
• Consult a second person to transport the instrument
• Do not drop the instrument
• Place the instrument on a stable, even and vibration-free surface
• Keep limbs out of crushing zone
To Next Page
Loading...
