Buchi Rotavapor R-220 Pro Continuous - 7 Condenser Clamps

5 Putting into operation
41 R-220 Pro Continuous Operation Manual, Version A
5.7 Condenser clamps
a
b
c
Flat spring
a
Turn the lever counterclockwise to loosen / open the clamp. It is not necessar y to completely open the clamp!
b
Pull the support o-ring onto the rod. Shift the opened clamp with the at spring side onto the rod until it
touches the o-ring. The clamp weight is now supported by the o-ring.
c
Inser t the condenser with the mounted holder (here illustrated without condenser!) into the free end of the
clamp. Turn the xation screw clockwise to xate the condenser in its position.