5 Putting into operation
57 R-220 Pro Continuous Operation Manual, Version A
5.19 Removing the interface for remote control
a
b
X Tilt the I-300 Pro display towards you a.
X Remove the I-300 Pro display b from the holder c.
X You can ll the space with a blind cover (see chapter 10.4 "Miscellaneous parts")
X For reinstallation proceed in reverse order.
NOTE
• More information about the operation and handling of the available controller models can be found
in the respective operation manuals of the controllers.
!
CAUTION
Risk of injury when remote controlling Rotavapor® R-220 Pro without visual contact
• Keep visual contact to the Rotavapor® R-220 Pro to ensure that no-one is attempting to
operate the device while it is being remote controlled
c
To Next Page
Loading...
