5 Putting into operation
55 R-220 Pro Continuous Operation Manual, Version A
Push down the unlock rocker at the left half of the snap ange.
Open the snap ange completely and carefully take away the evaporating ask.
Using the ask handler
The handler can increase the level of safety when placed on top of the heating bath at ask exchange.
However, the ask handler is not suitable as an installation support! The lift mechanism does not stop
automatically when the evaporating ask has reached its individual installation height!
Using the ask handler installed on the heating bath to lift or lower the evaporating ask
can be dangerous for the operator and can cause device damages.
!
WARNING
Serious injuries by ying pieces of broken glass.
• Do not use the bath lift to install or deinstall the evaporating ask
• Do not operate the lift with the ask handler installed
NOTICE
Risk of instrument damage by wrong mains supply.
• External mains supply must meet the voltage given on the type plate
• Check for sucient grounding
To Next Page
Loading...
