Buderus Logamatic 4323 - Page 61

Additional programming options
8
Logamatic 4323 - Subject to technical modifications.
61
Entering the first switching point (Monday – Friday, 05:00, 21 °C)
You can select days individually or in blocks:
– Monday – Thursday
– Monday – Friday
– Saturday – Sunday
– Monday – Sunday
Hold down "Weekday" and select the required date or block with the rotary
selector (here: "Monday-Friday").
Release "Weekday" to save your input.
Hold "Time" down, and select the required time with the rotary selector
(here: "05:00").
The display shows the new switching point.
Release "Time" to save your input.
Hold "Temp" down, and select the required temperature with the rotary selector
(here: "21°C").
You cannot just enter an arbitrary temperature here. The factory-set day
and night setback temperatures are available, which can which can be modified
(Æ
Chapter 6.4).
Release the "Temp" key to save your input.
+
New switch.point
Monday-Friday
----
at ---
+
New switch.point
Monday-Friday
----
at 05:00
+
New switch.point
Monday-Friday
21°C
at 05:00