Additional programming options
8
Logamatic 4323 - Subject to technical modifications.
62
Only after all three details (day/time/temperature) have been set the new
switching point will be automatically saved under "Own program" and the
heating circuit number (here: "2"). The saving function is not visualised on the
display. The display shows a blank screen "New switch.point" for the next
switching point.
z Enter the second switching point (Monday – Friday, 21:00, 17 °C).
z Enter the third switching point (Saturday – Sunday, 09:30, 21 °C).
z Enter the fourth switching point (Saturday – Sunday, 23:30, 17 °C).
To enter the second to fourth switching points, you only need to repeat the
previous steps.
Only after all switching points have been correctly entered, press "Back" to
return to the permanent display.
Your heating program will now operate according to your "Own program".
You
can call up your new "Own program" by pressing "Prog" and turning
the
rotary selector.
To Next Page
Loading...
Need help?
General
