Buell 2005 FIREBOLT - Page 182

2005 Buell Firebolt: Engine 3-21
HOME
11. Disconnect and remove air scoops, right and left sides.
12. Remove complete chin fairing, (7) bolts.
13. Remove transmission sprocket side cover.
14. Remove rear belt and idler pulley. See 1.10 DRIVE BELT
and 2.13 REAR BRAKE MASTER CYLINDER.
NOTE
For details on removal of components on XB12R models with
interactive exhaust system, see REMOVAL under 7.6
INTERACTIVE EXHAUST SYSTEM(XB12 MODELS ONLY).
15. See Figure 3-18. Remove muffler:
a. Remove front muffler strap fastener (7). Front strap
will not be removed.
b. Alternately loosen rear strap fasteners (12) and
remove rear muffler straps.
c. Loosen Torca clamp and remove muffler.
d. Loosen front muffler mount.
Figure 3-18. Muffler and Mounting System
1. Clamp, Torca
2. Muffler mount, front
3. Screw, front muffler mount (1)
4. Bushings, front muffler mount (2)
5. Flat washer, front muffler mount (1)
6. Nut, front muffler mount (1)
7. Front muffler strap fastener
8. Muffler strap, front
9. Muffler bracket, rear
10. Screw, rear muffler bracket (2)
11. Flat washer, rear muffler bracket (2)
12. Rear muffler strap fastener
13. Muffler strap, rear (2)
14. Muffler
11
9
14
8
2
1
13
3
10
b0986
x
3
x
12
7
4
5
6