12.1.2 Safety Side Requirements
12.2 Translation of EC Declaration of Conformity
Length x width 200 x 90 cm
Thickness/height 10-19 cm (metal mattress base)
10-15 cm (comfort mattress base)
Foam rubber density min. 38 kg/m
3
Compression hardness min. 4.2 kPa
Applicable standards: DIN 13014
DIN 597 Part 1 and 2
Height above mattress ≥ 220 mm
Gap between bars and mattress base ≤120 mm
Foam rubber density min. 40 kg/m
3
Gap between safety side and headboard ≤ 60 mm
Gap between safety side and footboard ≥ 318 mm
Permissible accessory safety sides:
Type/model Split safety side (TSG) Full-length safety sides
(DSG)
Item no.: (right-hand side)
Item no.: (left-hand side)
We, Burmeier GmbH & Co. KG, in our sole responsibility as the manufacturer, hereby de-
clare that this product complies with the provisions of REGULATION (EU) 2017/745 OF THE
EUROPEAN PARLIAMENT AND THE COUNCIL of 5 April 2017 (MDR).
The full latest version of the declaration of conformity is available on request from our cus-
tomer centre (for contact details please refer to the chapter Part A: Address, Market Informa-
tion » 1) or go to the dealer area on our website.
Appendix
68 Part B: Operator and Technical Personnel
To Next Page
Loading...
