3.5.2.2 Removal
3.6 Safety sides
WARNING
Proceed in reverse order to the attachment process.
Risk of injury
Failure to heed this warning may result in physical injury due to falling from the bed.
•
Use only the safety sides described in this manual. Safety sides are either factory integra-
ted into the bed or available as accessories.
The bed is delivered as standard without any safety sides.
At the customer’s request, the bed can be equipped with safety sides to protect the resident
from falling out of bed. The safety sides can be raised from the lowered position beside the
mattress base to protect the resident.
Should it later be necessary to use a safety side, the bed can easily be fitted with this at a
later date.
There are two versions of safety side to choose from:
•
Split safety side (TSG)
•
Full-length safety sides (DSG)
Type of safety side Type of mat-
tress base
Height of safety
side
Max. mattress
height
Full-length safety side Metal approx. 41 cm approx. 19 cm
Comfort approx. 37 cm approx. 15 cm
Split safety side Metal approx. 41 cm approx. 19 cm
Comfort approx. 37 cm approx. 15 cm
Assembling the Care Bed
Part B: Operator and Technical Personnel 23
To Next Page
Loading...
