3.4 Headboard and footboard
WARNING
12. Raise the thigh rest.
13. Place the thigh rest motor in the take-up.
14. Secure the thigh rest motor in place on the housing side using the locking pin [5].
Note: Observe the following installation position. The housing assembly must be loca-
ted over the lifting motor.
15. Guide the lifting bar for the thigh rest motor into the take-up.
16. Secure the lifting bar with the locking pin [6].
As an optional feature, the headboard and footboard can be quickly fitted/removed without
tools to provide easier access to the resident. The headboard and footboard are fitted/
removed by operating a locking lever that is attached to the cross tubing.
Risk of injury
Failing to heed this warning may result in physical injuries due to entrapment or falling
caused by incorrect assembly/storage of split safety sides/headboard and footboard/side
panels with Easy Switch system!
•
Please carefully follow the assembly steps described below.
Assembling the Care Bed
Part B: Operator and Technical Personnel 15
To Next Page
Loading...
