4.5.2 PID Number
4.5.3 Materials used
Explanation of the graphical symbols used:
Permissible weight of patient
Minimum resident measurements/weight: Height: 146 cm, weight: 40
kg; body mass index “BMI”: 17
Only use mattresses that are approved by the manufacturer.
Lock the handset if the resident could be at risk due to inadvertent
motorised adjustments.
Relevant order information is summarised for the manufacturer under the PID number. Have
the PID number ready any time you contact your specialist dealer. You can find the PID no.
on the bed frame at the head end.
Part A: Image1:
PID number, example
For the most part, the bed was manufactured from steel profiles whose surfaces were finish-
ed with a polyester powder coating or a metal coating of zinc or chromium. The head and
footboards, safety side bars and sprung slats are made of wood or wood products whose
surfaces have been finished.
All surfaces that can be touched during normal use have been tested for bio-compatibility
and are harmless to humans when in contact with the skin.
Product Description
Part A: General Information 11
To Next Page
Loading...
