4 Product Description
4.1 Use for the intended purpose
•
This bed was developed as a comfortable solution for caring for persons in need of
care or infirm persons in homes for the elderly, as well as in nursing homes. Further-
more, it was developed as a supporting solution for home care, for infirm, disabled or
frail persons. It it designed to support this care.
•
The use of this care bed in hospitals is only permitted in rooms designed for medical
treatment of the application group 0 (in accordance with DIN VDE 0100 Part 710).
•
Further details on permissible environments for use can be found in chapter Part A:
Ambient conditions » 12. Further information on possible electromagnetic influences
can be found in the chapter Part A: Information on electromagnetic compatibility
(EMC) » 20
•
This bed must only be used as a single bed.
•
This bed may be intended for care under the supervision of a doctor and be used for
diagnosis, treatment or observation of the resident. It is therefore equipped with a lock-
ing function of the electrical adjustment devices.
•
This bed has no special connectors for potential equalisation. Please pay attention to
this before connecting additional mains-operated (medical) electrical equipment.
If necessary, further advice on additional protective measures can be found:
⁃
In the instruction manuals of these additional mains-operated electrical devices
(e.g. compressed air positioning systems, infusion pumps, enteral feeding devi-
ces, etc.)
⁃
In the DIN EN 60601-1-1 standard (Safety of Medical Electrical Systems)
⁃
In the current issue of the VDE 0107 standard (High-voltage Installations in Hos-
pitals)
•
This bed may be operated without restrictions with a permanent maximum load of 225
kg (resident and accessories).
•
The permitted weight of the resident depends on the total weight of accessories attach-
ed at any time (e.g. respirators, infusions,…)
Weight of accessories (incl. mattress) Maximum permitted resident weight
10 kg 215 kg
Part A: General Information 5
To Next Page
Loading...
