3.4.1 Attachment
Similar to illustration!
•
After assembly, carry out the mandatory checks to make sure that the fixings are secure.
•
To ensure that the plastic locking levers of the “Easy Switch” system function properly, do
not allow them to fall or suffer severe knocks during disassembly or storage.
•
Never use “Easy Switch” systems that are damaged.
1 Standing behind the headboard/foot-
board, firmly grip the uppermost cor-
ners of the headboard/footboard with
both hands
2 Insert the locking hooks [1] of the
adapters as far as they will go into the
slits of the cross tube [2] and make
sure the headboard/footboard is fitted
securely
Assembling the Care Bed
16 Part B: Operator and Technical Personnel
To Next Page
Loading...
