3 Insert the locking hooks of the adapters in-
to the slits in the long tube as far as they
will go, and ensure that the safety side is
inserted properly.
4 Swivel the locking levers (left and right-
hand side) upwards and press them until
they audibly click into place.
5 Check that the safety side is firmly attach-
ed by holding it at the lower edge with both
hands and trying to move it up and down.
6 Repeat steps 1 to 3 with the remaining
three sections of the split safety side.
Assembling the Care Bed
Part B: Operator and Technical Personnel 29
To Next Page
Loading...
