burmeier Regia - Page 87

Inspection report
I. Visual inspection OK Not
OK
Description of de-
fect
Visual inspection of the electrical components
What? How?
Stickers and type plates Present, legible
Up-to-date instruction manual
for the product in question
Present, legible
Control unit/plug-in power sup-
ply housing
Correct position, dam-
age, signs of spilt liq-
uids/contamination
that may affect the in-
sulation
Motor housings and lifting tubes
Handset: housing and keypad
film
Motor and handset cables Damage, routing of
cable
Cable harness/switch mode
power supply sockets
Available, correct po-
sition
Visual inspection of the mechanical components
Stickers and type plates Present, legible
Patient lifting pole, adapter
sleeves
Damage, deformation
Bed frame Damage, deformation
Sprung slats Damage, splinters
Castors Damage
Mattress base Damage, deformation
Wooden surround Damage, splinters
Welded seams Split welded seams
Safety side bars Damage, splinters
Knurled screws Fixed securely
Wearing parts, such as joints Damage
Maintenance
Part B: Operator and Technical Personnel 51