EasyManua.ls Logo

BUSCH MINK - EU Declaration of Conformity

BUSCH MINK
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EU Declaration of Conformity | 15
Instruction Manual MINK MV 0500-0600 B_EN_en 37 | 40
15 EU Declaration of Conformity
This Declaration of Conformity and the CE-markings affixed to the nameplate are valid for the machine within the Busch scope of delivery. This Decla-
ration of Conformity is issued under the sole responsibility of the manufacturer.
When this machine is integrated into a superordinate machinery the manufacturer of the superordinate machinery (this can be the operating compa-
ny, too) must conduct the conformity assessment process for the superordinate machine or plant, issue the Declaration of Conformity for it and affix
the CE-marking.
The manufacturer Ateliers Busch S.A.
Zone Industrielle
CH-2906 Chevenez
declares that the machine: MINK MV 0500 B; MINK MV 0600 B
fulfill(s) all the relevant provisions from EU directives:
‘Machinery’ 2006/42/EC
‘Electromagnetic Compatibility’ (EMC) 2014/30/EU
‘RoHS’ 2011/65/EU Restriction of the use of certain hazardous substances in electrical and electronic equipment (incl. all related applicable amend-
ments)
and comply(-ies) with the following harmonized standards that have been used to fulfill those provisions:
Standards Title of the Standard
EN ISO 12100 : 2010 Safety of machinery - Basic concepts, general principles of design
EN ISO 13857 : 2019 Safety of machinery - Safety distances to prevent hazard zones being reached by the upper and lower
limbs
EN 1012-2 : 1996 + A1 : 2009 Vacuum pumps - Safety requirements - Part 2
EN ISO 2151 : 2008 Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (grade 2)
EN 60204-1 : 2018 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN IEC 61000-6-2 : 2019 Electromagnetic compatibility (EMC) - Generic standards. Immunity for industrial environments
EN IEC 61000-6-4 : 2019 Electromagnetic compatibility (EMC) - Generic standards. Emission standard for industrial environ-
ments
Legal person authorized to compile the technical file
and authorized representative in the EU
(if the manufacturer is not located in the EU):
Busch Dienste GmbH
Schauinslandstr. 1
DE-79689 Maulburg
Chevenez, 25.01.2022
Christian Hoffmann, General Director

Related product manuals