BWT Infinity M - Safety Instructions; General Safety Instructions; Personnel Qualifications


EN
 
 
The product was manufactured according to all
recognised regulations and technical standards and
was in compliance with the relevant legal require-
ments when it was put into circulation.
Nevertheless, it can pose a risk of personal in-
jury or property damage if you do not observe this
chapter and the safety instructions throughout this
documentation.
● Read this documentation thoroughly and in full
before working with the product.
● Retain the documentation in such a way that it is
accessible to all users at all times.
● Always hand over the product to third parties to-
gether with the full documentation.
● Follow all of the instructions in relation to the
proper handling of the product.
● If you detect damage to the product or the mains
supply, stop its operation and notify a service
technician immediately.
● Use only accessories, spare parts and consum-
able materials that have been approved by BWT.
● Adhere to the environmental and operating con-
ditionsspeciedinthe“Technicaldata”chapter.
● Use your personal protective equipment. It en-
sures your safety and protects you from injury.
● Onlyperformtasksthataredescribedinthese
operating instructions or if you have been
trained to do so by BWT.
● Performalltasksincompliancewithallapplica-
ble standards and provisions.
● Instruct the operator in the function and opera-
tion of the product.
● Instruct the operator in the maintenance of the
product.
● Instruct the operator in relation to potential dan-
gers that may arise while operating the product.
 



This documentation is intended for operators,
installers without training from BWT, installers with
trainingfromBWT(e.g.drinkingwaterspecialists),
and BWT service technicians.
This documentation contains important information
forttingtheproductsafelyandproperly,starting
up, operating, using, maintaining, and disassem-
bling the product, and for correcting simple faults
independently.
Read this documentation in full before working with
theproduct.Payparticularattentiontothechapter
“SafetyInstructions”.
 
The installation work described in these instructions
requires basic knowledge of mechanics, hydraulics
and electrical systems as well as knowledge of the
corresponding specialist terms.
To ensure that the device is installed safely, this work
mustbeperformedonlybyaqualiedspecialistor
atrainedpersonundertheguidanceofaqualied
specialist.
A  is anyone who can assess
the work assigned to him or her, identify potential
risks, and take suitable safety measures thanks
to his or her specialist training, knowledge and
experienceaswellashisorherknowledgeofthe
applicableregulations.Aqualiedspecialistmust
comply with the applicable specialist regulations.
An   is anyone who has been
instructedand,ifnecessary,trainedbyaqualied
specialist in the transferred tasks and the potential
risks presented by improper behaviour and who
has been educated about the necessary protective
equipment and measures.