BWT Infinity M - Transport and Installation Safety

17

EN
 
To avoid damage during transport to the installation
location, do not remove the BWT product from the
packaging until you have reached the relevant loca-
tion. Then dispose of the packaging in the correct
manner.Checkthatthedeliveryiscomplete.
If there is a risk of frost, drain all components that
convey water.
Lift or transport the product or its components only
from the designated suspension eyes or attachment
points, if present.
The product must be installed or mounted on a suf-
cientlystrongandlevelhorizontalsurfaceandmust
be adequately secured against falling or tipping.
 
This symbol indicates general
risks to persons, units or the
environment.
This symbol indicates that the
product can be recycled after it
is shut down.
This symbol indicates informa-
tion or instructions that you must
observe in order to ensure safe
operation.
 

In this document safety instructions precede any
sequence of actions that could cause harm to per-
sonsordamagetoproperty.Allhazardprevention
measures must be followed.
Safety instructions are displayed as follows:



Type of hazard (e.g. risk of fatal injury)!
► 
► 
 Indicates the severity
ofthehazard
 Calls attentionto the
hazard


Indicates the type
and the source of the
hazard


Explains the conse-
quences of not follow-
ing the safety instruc-
tions


Explainshowtoavoid
thehazard