VEHICLE OVERSPEED
-
52:
A
failure
in
the
suspension control system has occurred when this
message appears. The
PCM
determines the speed your
vehicle is limited
to.
Have your vehicle serviced
if
this
message appears.
VEHICLE
SPEED
LIMITED TO
XXX
MPH
(KM/H)
-
113:
A
failure in the suspension control
system has occurred when this message appears. The
PCM
determines the speed your vehicle is limited to.
Have your vehicle serviced
if
this message appears.
Programmable, Memory and
Personalization Features
(If
Equipped)
Your vehicle may be equipped with the following
features that can be individually programmed,
memorized or personalized for up to two drivers. For
a
brief description
of
each feature (except
for
climate
control and radio personalization), see each feature
in
the Index.
Memory
Seat
and Mirrors
6
-
:
4’
To
begin progranming,
adjust the driver’s seat
(including lumbar
adjustments) and both
outside mirrors to
a
comfortable position
and then press the
SET
button. Within five
seconds, press button
“1
.”
A
second mirror and seating position may be
programmed by repeating
the
above steps and pressing
button
“2”
instead
of
button
1.
Note that each time a
memory button
is
pressed, a single beep
will
sound
through the left front speaker.
If
your vehicle is in
PARK
(PI,
you
can recall mirror
and
seating positions by briefly pressing button
1
or
2.
This
will adjust the seat and mirrors to where you have
previously programmed them.
If
you
have accidentally
pressed one
of
the memory recall buttons and want to stop
seat or mirror movement, press one of the manual seat or
mirror control buttons.
This
cancels
a
memory recall.
2-79
To Next Page
Loading...
