You
can
also recall a seat and
mirror
position
if
your
vehicle is not
in
PARK
(P).
Press and hold either the
1
or
2
button until seat and
mirror
movement is
complete. Releasing the buttons will stop adjustment.
The
EXIT
button can be programmed to allow easy exit
for up
to
two drivers. Adjust the seat to a comfortable
“exit” position and then press the SET button followed
by the EXIT button. While your vehicle is in PARK (P),
briefly press the EXIT button to recall your programmed
exit position.
Programmable Automatic
Door
Locks
Your vehicle’s ignition must be in
RUN.
To begin
programming, press and hold the INFO and
INFO
RESET
buttons at the same time
to
display the
following prompts.
DOORS LOCK
IN
GEAR:
All doors automatically
lock when shifted out of PARK (P).
No
automatic
door unlock.
DOORS UNLOCK IN PARK:
All doors automatically
lock when shifted out
of
PARK (P) and unlock when
shifting into PARK (P).
DRIVR
UNLOCK IN
PARK:
All
doors
automatically
lock when shifted out
of
PARK
(P).
Only the driver’s
door automatically unlocks when shifted into PARK
(P).
DRIVR UNLOCK
IN
KEY
OFF:
All doors
automatically lock when shifted out
of
PARK (P).
Only
the
driver’s door automatically unlocks when the
ignition key is turned to
OFF.
DOORS UNLOCK KEY
OFF:
All doors
automatically lock when shifted
out
of PARK (P). All
doors automatically unlock when the ignition key is
turned to OFF.
A
“yes” or “no” response must be made after each
prompt
is
displayed in order to continue on to the next
prompt or personalization feature. The yes and
no
buttons are displayed
in
amber on the vehicle’s digital
control panel. Press
the
TRIP RESET
button to choose
yes, press the
INFO
RESET button
to
choose no
or
press
the INFO button to
“skip”
to
the next
personalization feature.
FEATURE
ON
appears when a
yes
response is made
and FEATURE OFF appears with a
no
response.
2-80
To Next Page
Loading...
