©2022 CAE 905K560252 v1.2 21
Setup
To ensure that the manikin is ready for setup and prevent damage to your simulator, it is important
to complete the preparation steps as instructed.
Setup Preparation
Follow the guidelines below before you begin the setup procedure:
• Prior to using the manikin, ensure it reaches ambient temperature.
• Ensure multi-plug AC power outlets exist in the workspace to charge the simulator and its
powered components. The Luna manikin and instructor tablet are battery operated and
enabled for wireless use; however, the patient monitor and external router must be
plugged into a power source during use.
• Plug in the tablet, manikin, and rechargeable accessories (such as StethoSym) to a power
source using only the power cords provided. Use the diagram provided in the Unpacking
Your CAE Manikin to identify the designated cords associated with this equipment.
• Do not use an USB-C adapter other than the USB-C adapter provided by CAE in your
shipment. Using other adapters will damage your product.
• Do not power on any components unless instructed to do so in the Setup Procedure
section of this guide.
Unpacking the Manikin
The manikin comes in a custom-designed container that provides proper placement for all parts and
accessories.
Follow the guidelines below when opening your shipment:
• Refer to the Unpacking Your CAE Manikin document provided in the shipping container to
remove items from the shipping container.
• Exercise extreme caution when using sharp objects, such as a box cutter. A damaged
container can lead to improper storage of the manikin, potentially damaging skin, body
parts, and accessories.
• Reserve a space approximately 2 ft by 4 ft (61 cm by 122 cm) to store the shipping
container before and after use. For more information, see the Care and Maintenance
section of this user guide.
• Read and understand the Cautions and Warnings located in the beginning of this user
guide.
• Follow the sequence of the steps carefully. Complete all steps in order.
To Next Page
Loading...