Using Luna
60 ©2022 CAE 905K560252 v1.2
CAELuna
Heart, Lung and Bowel Sounds
Heart sounds are synchronized with the cardiac cycle and lung sounds are independently
synchronized with ventilation of the left and right lungs. Sounds can be adjusted by tapping the
Sounds button on the Run screen in Maestro. When the Sounds panel appears, select one of the
tabs: Heart, Lungs, or Bowel. Adjust all areas or isolate by changing the sound type per region, if
applicable. Select the sounds from the Type drop-down menu. See the Maestro for Luna User Guide
for complete details.
Vocal Soundsh
A variety of programmable vocal sounds are available. To select a sound from the Vocal Sounds
Speech drop-down menu, tap the Sounds button on the Run screen and from the Sounds panel, tap
the Vocal Sounds tab. Select one of the sounds from the drop-down menu. Sounds are emitted
immediately and play continuously when selected from the drop-down menu. To stop playing a
selected vocal sound, select None from the list.
Note: There may be a delay of up to 5 seconds for the sound clip to complete after selecting None.
The Speech Sounds buttons contain predefined phrases presented in a female or male voice
depending on the gender associated with the scenario. A patient must be running for the Speech
Sounds to work properly.
Using the StethoSym
StethoSym can only be used on manikin configurations that include RFID tags. For more information
on configurations, see the Simulator Configurations section of this user guide.
Setting Up the StethoSym
To set up the stethosym:
To Next Page
Loading...