©2022 CAE 905K560252 v1.2 45
Using Luna
Note: When using a Zoll monitor, ensure that Luna is running on a wireless configuration (tablet with
USB-C adapter and wireless dongle).
Removing ECG Posts
If the manikin does not require connection to a 34-lead ECG, the ECG posts on the Luna manikin can
be removed.
WARNING: Do not attempt to remove the ECG posts with any tools except the CAE-provided ECG post
removal tool. To request the CAE ECG post removal tool, contact your CAE Sales Representative or
Customer Service.
To remove the ECG posts from the Luna manikin:
a. Slide the round part of the tool around the phalange on the ECG post. The
phalange should be positioned on the top side of the small ridge inside the
tool.
Luna’s Chest
b. Holding onto the tool handle, pull straight back to remove the ECG post.
Installing ECG Posts
To install the ECG posts, press the pegs into the locations on the chest and torso of the manikin until
secure.
Defibrillation
The manikin can receive simulated electrical therapy in two ways:through the software or by using
the SymDefib device with a live defibrillator.
Simulated Defibrillation
For instructions on administering defibrillation through the software, refer to the Maestro for Luna
User Guide.
ECG Post
Removal Tool
ECG Post
To Next Page
Loading...