CS3000 User’s Guide
20 Calsense
Status Screen
The status screen is an active screen with multiple cursor positions. It provides information on what’s
running, what’s scheduled to run next, real-time weather data based on weather sensors attached to
the controller, real-time flow in gallons per minute, and the controller’s electrical current draw in amps.
It also shows critical issues affecting irrigation such Mainline Break or 2-Wire Cable Overheated.
To view the Status screen (Figure 8):
1. From the Main Menu, navigate to and select Status. The first available cursor position is
highlighted.
2. Navigate to and select the desired field to provide additional information:
• No stations are watering: Takes the user to the Irrigation Details screen
• Irrigation is running: Takes the user to the Irrigation Details screen
• There will be no scheduled irrigation: Takes the user to the Station Groups screen
• Next scheduled irrigation will run: Takes the user to the Start Times and Water Days
screen
• Gage: ET valve received from the ET Gage since 8:00 PM. Takes the user to the Weather
Status screen
• Rain: Total accumulated midnight-to-midnight rain. Takes the user to the Weather
Status screen
• Wind: Wind speed. Takes the user to the Weather Status screen
• gpm: Total flow rate for ALL mainlines. Takes the user to the Mainline Status screen.
• amps: Current draw at THIS controller. Takes the user to the Electrical Status screen.
3. When finished, press BACK to return to the Main Menu.
To Next Page
Loading...
Need help?
General
